In NB-Designer double click on the NB in the “Project Structure Window” to open the HMI Attribute. Start CX-Programmer, create a new program and select a CP1L-EM or add a second CP1L-EM to the existing file. Set the IP address to (192.168.250.3), Port (9600) and the Node ID to (3) in the PLC tab. In NB-Designer, double click on the CP(PLC1) in the “Project Structure Window” to open the PLC Attribute. Start CX-Programmer, create a new program and select a CP1L-EM. Set the IP address to (192.168.250.2), Port (9600) and the Node ID to (2) in the PLC tab. Select the ‘HMI’ tab and set the IP address to (192.168.250.1) and the Subnet Mask to (255.255.255.0).ĭouble click on the CP(PLC0) in the “Project Structure Window” to open the PLC Attribute. Start NB-designer, create a new program, drag and drop the NB (*TW001) and two Omron CP Series Ethernet (UDP Slave) on the “Project Structure Window”.ĭouble click on the NB in the “Project Structure Window” to open the HMI Attribute.
In order to avoid malfunctions caused by interferences, use shielded cables. NB to CP1L-EM (2pcs) through Ethernet ( FINS/UDP)
cx-programmer 9.This article is related to the article NB HMI and Connecting Peripheral Devices and explains how connection can be established with two CP1L-EM using Ethernet ( FINS/UDP). CX-Programmer comes with a context sensitive on-line help system which is designed to complement this manual and to provide a quick reference at any point while using CX-Programmer when the manual is not to hand. Separate OMRON manual describes the common features to PLC programming used by software other than CX-Programmer. Omron Cx Programmer Version 9, free omron cx programmer version 9 software downloads. Subscribe to receive free email updates: 1 Response to 'Install Software PLC Omron CX-ONE V4.30 - CX Programmer 9.5 Full' ROWELL ENGINEER Monday, March 23. Download disini: CX-One V4.30 - CX Programmer 9.5 Full CX-One V4.40 - Full Omron Software.
0 kommentar(er)
